Novafill Flex 2
EXTRA FILLING PRIMER AND ADHESION PROMOTOR
Adhesion promotor, extra filling primer and elastizer.
Perfect adhesion on most hard materials, without the use of an adhesion primer.
With width control in the spray head.
Packaging
| SKU | EAN | Description | ||
|---|---|---|---|---|
|
120712000 - 5415207003542 - Novafill Flex 2 dark grey - aerosol 500ml | 120712000 | 5415207003542 | Novafill Flex 2 dark grey - aerosol 500ml |
|
|
120722000 - 5415207003535 - Novafill Flex 2 black - aerosol 500ml | 120722000 | 5415207003535 | Novafill Flex 2 black - aerosol 500ml |
Description
Novafill Flex 2 has a very high flexibility despite its very good filling capacity. Ideal for carrying out economically small repairs and three basic colors available for an easier paint finish. Novafill Flex 2 has a fine top layer which facilitates the finish, less sanding. Novafill Flex 2 is suitable for accelerated drying with infrared.
Application
- Thanks to the good bond on most plastics, Novafill Flex 2 is perfect to use on spoilers, bumpers, wheel covers, decorative covers of outside mirrors,... .
- Also very suitable for galvanised parts, white metals, old paints, ferrous and non-ferrous metals, ... .
Technical information
Novafill Flex 2
EXTRA FILLING PRIMER AND ADHESION PROMOTOR
- Drying time at 20°C: hand-dry after 15 min. (50 micron film).
- Colour: white, dark grey, red, blue, anthracite.
- Consumption:
- 1 full covering layer = 233 gr/m²
- 1 full filling layer = 333 gr/m²
- Nozzle: adjustable in narrow horizontal or wide vertical shape.
- Max. temperature resistance: 120°C.
- Shelf life: 24 months, keep dry, cool and frost-proof.
- Safety measures: consult the Safety Data Sheet.
Instructions
- After relasing the mixing ball, shake well before use.
- Sand the surface and clean and degrease with Safety Clean and/or Multifoam.
- Apply Novafill Flex 2 in a serie of thin layers, allowing a brief drying period between layers.
- Once dry (20 min) sand before applying paint. Sanding may be done dry (500 grit) or wet (800 grit).
- Empty the nozzle spraying with the can upside down.
After drying (+/- 15 minutes), Novafill Flex 2 can be sanded (both wet and dry). Can be painted over after 2 hours with the most common paints. With plastics that contain PE or PP, Novafill Flex 2 may have less good or even poor adhesion. The use of Seal & Bond Special Primer can considerably improve adhesion.
Which type of Novafill Flex to use?
As a first layer on metal: Nova Finish Primer, with its corrosion-resistant properties.
As a first layer on other substrates (e.g. synthetic materials): Novafill Flex or Novafill Flex 2, with their adhesive properties (on difficult plastics first apply Seal&Bond Special Primer).
Subsequent layers according to the requirement for filling: Novafiller, Novafill Flex or Novafill Flex 2.
Nova Finish Primer is recommended as a final layer prior to painting because of its fine structure: easier finishing and time savings due to reduced requirement for sanding.