HPG-590 High Pressure Grease

HEAVY-DUTY GREASE FOR LONG-LASTING BEARING LUBRICATION

NLGI class 3, suitable for heavily loaded bearings

Resistant up to temperatures up to +130°C, and briefly up to +150°C

Usable at temperatures down to -30°C

Completely waterproof

Non-corrosive to non-ferrous metals

Long service life in the bearings

high-pressure-grease-hpg-590-100gr-be-231161000-1024

Packaging

SKU EAN Description
high-pressure-grease-hpg-590-100gr-be-231161000 231161000 - 5415207088228 - HPG-590 High Pressure Grease - 100gr 231161000 5415207088228 HPG-590 High Pressure Grease - 100gr
high-pressure-grease-hpg-590-500gr-be-231165000 231165000 - 5415207088242 - HPG-590 High Pressure Grease - 500gr 231165000 5415207088242 HPG-590 High Pressure Grease - 500gr

Description

A light-coloured, heavy-duty lubricating grease based on mineral oil with a lithium thickener. It offers excellent resistance to high pressures, water and elevated temperatures, providing long-term lubrication for bearings and mechanical components in industrial and automotive applications.

Application

  • Lubrication of wheel hubs, ball joints, and bearings in motor vehicles
  • Lubrication of automotive water pumps
  • Long-term lubrication of bearings in filling and packaging machinery
  • Bearing lubrication in construction and agricultural machinery operating under heavy loads
  • Protection against dust and moisture in outdoor applications
  • Lubrication of guide rails and cable systems in lifts and construction cranes

Technical information

high-pressure-grease-hpg-590-100gr-be-231161000-1024

HPG-590 High Pressure Grease

HEAVY-DUTY GREASE FOR LONG-LASTING BEARING LUBRICATION

high-pressure-grease-hpg-590-100gr-be-231161000-1024
  • Chemical basis: mineral oil.
  • Thickener: Lithium stearate.
  • NLGI class: 3.
  • Colour: yellowish.
  • Worked Penetration (0.1mm): 220 - 250.
  • Dropping point: 190°C.
  • Temperature range: -30°C to +130°C (briefly +150°C).
  • Kinematic viscosity (40°C): 290 mm²/s.
  • Kinematic viscosity (100°C): 20 mm²/s.
  • Relative density (20°C): 0.86 - 0.95
  • Water resistance: fully resistant.
  • Copper corrosion: grade 1.

Technical documents

Instructions

  • Thoroughly clean all parts and remove old grease, dirt and moisture.
  • Fill roller bearings to approximately half their capacity, high-speed bearings to one-third, and low-speed bearings completely.
  • During installation, apply a thin layer of grease to all contact surfaces.
  • Remove any excess grease and close the packaging securely after use.
  • Do not mix with greases based on other thickener types without first carrying out a compatibility test.

Order this item

Pro Shop

A question?

Contact us