Duoflux

CONNECTING, SOLDERING, INSULATING AND SEALING TWO CONDUCTORS

Watertight connection of both flexible and rigid conductors.

Transparent insulation allows visual control of the connection.

Resistant to temperatures from -60°C to +130°C.

duoflux-groep-uni-1024

Packaging

SKU EAN Description
duoflux-groep-uni 830100000 - - Case Duoflux-Topflux - ass. per 50 830100000 Case Duoflux-Topflux - ass. per 50
duoflux-groep-uni 830301000 - - Case Duoflux - ass. per 100 830301000 Case Duoflux - ass. per 100
duoflux-groep-uni 830310000 - 5415207310008 - Duoflux - 0,2mm - 0,7mm - clear - 50pcs 830310000 5415207310008 Duoflux - 0,2mm - 0,7mm - clear - 50pcs
duoflux-groep-uni 830320000 - 5415207312007 - Duoflux - 0,5mm - 1mm - red - 50pcs 830320000 5415207312007 Duoflux - 0,5mm - 1mm - red - 50pcs
duoflux-groep-uni 830330000 - 5415207330006 - Duoflux - 1,5mm - 2,5mm - blue - 50pcs 830330000 5415207330006 Duoflux - 1,5mm - 2,5mm - blue - 50pcs
duoflux-groep-uni 830340000 - 5415207340005 - Duoflux - 3mm - 6mm - yellow - 50pcs 830340000 5415207340005 Duoflux - 3mm - 6mm - yellow - 50pcs

Description

  • For electrical connections, which require high quality, reliability, long life span and water tightness.
  • Very easy to install, the quality of the connection can be visually checked and it requires no special tools.
  • Can be applied on both twisted (flexible) and solid (rigid) conductors, suitable for copper as well as tinned wires, whether combined or not. 
  • Consists of a heat-shrinkable polymeric sleeve containing two solder rings with an incorporated flux and two thermoplastic sealing rings.

Technical information

duoflux-groep-uni-1024

Duoflux

CONNECTING, SOLDERING, INSULATING AND SEALING TWO CONDUCTORS

duoflux-groep-uni-1024
  • External wall: radiation cross-linked modified polyolefin.
  • Solder rings: 2 rings Cd 18, Sn 51, pb 32 % with activated flux.
  • Sealing rings: thermally stabilized thermoplastic.
  • Voltage loss: < 0,002 V.
  • Connection resistance: < 0,004 Ohm.
  • Insulation resistance: > 10 Giga Ohm.
  • Installation temperature: 143°C.
  • Temperature resistance: -60°C to +130°C.
  • Breakdown voltage: > 600V.
  • Degree of protection against humidity: IP 68, stays usable in water.
  • SCIP nr. Duoflux Clear:
    5175c7fa-cb27-4aa3-9b7a-8771b0f065d5
  • SCIP nr. Duoflux Red: 
    60ece7b4-d1f0-47bb-933b-c89d36cc687f 
  • SCIP nr. Duoflux Blue: 
    4381664e-3e19-4aa2-bf1f-e2b157ac02de
  • SCIP nr. Duoflux Yellow: 
    5a517eab-20c1-41b4-92cd-dbb7b84f695b

Instructions

Use a heat source such as teh Novatio Multi Torch or a hot air blower (set at + 350°C and equipped with a deflector).

Introduce the wires into the Duoflux and press the solder rings to hold the Duoflux in place.

Heat the Duoflux at the solder rings' level until they are evenly flowing and then heat the ends so that the coloured rings insulate and seal perfectly.

Allow it to cool completely without moving.

 

Wire diameter:

Clear:   from 0,2 mm  to 0,7 mm

Red:    from 0,5 mm to 1,0 mm

Blue:    from 1,5 mm to 2,5 mm

Yellow: from 3,0 mm to 6,0 mm

Technical documents

Order this item

A question?