XPR-200 Extreme Remover

FOR THE REMOVAL OF GRAFFITI, PAINT, SOOT, INK, ADHESIVE, PU FOAM

Free from harmful solvents 

Odourless and non-flammable 

Safe for health and the environment 

Reusable for up to nine months 

VOC-free 

xpr-200-extreme-remover-1l-en-1024

Packaging

SKU EAN Description
xpr-200-extreme-remover-1l-en 493611000 - 5415207088044 - XPR-200 Extreme Remover - can 1L 493611000 5415207088044 XPR-200 Extreme Remover - can 1L
xpr-200-extreme-remover-5l-en 493615000 - 5415207088068 - XPR-200 Extreme Remover - can 5L 493615000 5415207088068 XPR-200 Extreme Remover - can 5L

Description

The powerful cleaner that tackles even stubborn and fully cured contamination. Penetrates and soaks loose where needed. Non-corrosive, non-irritant and non-flammable, making it safe to store. Economical in use thanks to its strength and its 9-month reusability in rinsing and immersion tanks.

Application

  • Removal of graffiti 
  • Cleaning of spray guns 
  • Loosening of old paint layers on furniture, walls, moulds, metal objects 
  • Removal of most cured adhesives and sealants 
  • Cleaning of paintbrushes and rollers (including hardened ones) 
  • Dissolving and removal of PU foam 

Technical information

xpr-200-extreme-remover-1l-en-1024

XPR-200 Extreme Remover

FOR THE REMOVAL OF GRAFFITI, PAINT, SOOT, INK, ADHESIVE, PU FOAM

xpr-200-extreme-remover-1l-en-1024
  • Base: acetal solvent. 
  • Form: liquid, transparent, odourless. 
  • Density (20°C): 0.95 g/cm³. 
  • Boiling point: 209°C. 
  • Flash point: 88°C. 
  • Vapour pressure (20°C): 0.0069 kPa. 
  • Solubility in water: 26–27%. 
  • VOC content: 0%. 

Technical documents

Instructions

  • First remove as much contamination as possible mechanically or with other cleaners.
  • Apply generously to the surface.
  • Allow to act depending on the contamination:  
    • Graffiti, soot: 30 seconds – 1 minute  
    • Solvent-based adhesives, tar, lacquers: 1–5 minutes  
    • PU foam, polymer adhesives, silicones: 15–60 minutes  
    • For severe contamination on resistant substrates: up to 24 hours
  • Rub off the contamination.
  • Repeat if necessary.
  • Always rinse thoroughly with water.
  • When in doubt, first test on an inconspicuous area.
  • By allowing contamination to settle, XPR-200 is reusable for up to 9 months.
  • Treat contaminated product as chemical waste.

Order this item

Pro Shop

A question?

Contact us