- Remove loose rust, dirt and grease.
- Dilute 1 litre of Rust Remover in 10 litres of clear water in a Novabucket, which ensures 360° contact with the product and lets loosened rust fall through the grid.
- Fully immerse the pieces.
- Rinse the pieces with clean water, rub off any black deposits and dry thoroughly.
The immersion time depends on the application. At 20°C expect an immersion time of:
- 15 to 30 minutes for light, superficial rust.
- 2 to 12 hours for a thick layer of rust.
- 12 to 36 hours for deep, swelling rust.
Heating will accelerate the reaction (up to maximum +50°C).
Protect the pieces with Metalsol, Fixapox, Nova Finish Primer or Multi Super 5.