Foam Cleaner

POWERFUL CLEANER FOR ALL NON HARDENED PU-FOAMS

For foam guns and surfaces covered with PU foam.

Easy to use.

Applicable for all PU-foams.

foam-cleaner-500ml-en-1024

Packaging

SKU EAN Description
foam-cleaner-500ml-en 670802000 - 5415207001241 - Foam Cleaner - aerosol 500ml 670802000 5415207001241 Foam Cleaner - aerosol 500ml

Description

  • Easily removes non hardened PU-foam from all surfaces thanks to the added spray nozzle.
  • The easy way to clean a PU-Foam gun, screwing the spray can directly on the gun.

Application

  • for cleaning PU guns.
  • for removing uncured PU foam.

Technical information

foam-cleaner-500ml-en-1024

Foam Cleaner

POWERFUL CLEANER FOR ALL NON HARDENED PU-FOAMS

foam-cleaner-500ml-en-1024
  • Composition: e.g. acetone.
  • Appearance (at 20°C): liquid.
  • Vapour pressure (at 20°C): >= 8530 hPa.
  • Relative density (at 20°C): 0.79.
  • Water solubility: soluble. Soluble in: ethanol, ether, chloroform
  • Relative vapour density: > 1
  • Shelf life: 24 months, keep dry, cool and frostproof.
  • Safety measures: consult the Safety Data Sheet.

Technical documents

Instructions

Removing uncured PU foam

  • Install the supplied red nozzle.
  • Apply to a cloth and clean the surface.
  • Repeat if necessary.

Cleaning the Foam Gun

  • Fully close the Foam gun control knob and mount the Cleaner on the gun. Screw the spray can onto the gun until it blocks.
  • Fully open the gun adjustment screw and press the gun handle to remove any foam residue.
  • If pure cleaner comes out of the gun, release the lever and allow to act for a few minutes.
  • Press the lever until pure cleaner comes out.
  • Turn the knob fully closed and remove the cleaner.                                         
  • Remove any remaining foam that is still around the ring by using the red spray head.

Test the resistance of plastics and delicate surfaces on a non visible location.

Order this item

Pro Shop

A question?

Contact us