Seal & Bond MS22 X

HIGH-TECH SEALANT

Temperature upon application from -10°C to +40°C.

Strong and elastic.

Can be painted on and is mildew-resistant.

Ecological and safe.

sb-ms22-x-310ml-white-en-1024

Packaging

SKU EAN Description
sb-ms22-x-310ml-black-en 533310000 - 5415207048376 - Seal & Bond MS22 X black - cartridge 310ml 533310000 5415207048376 Seal & Bond MS22 X black - cartridge 310ml
sb-ms22-x-310ml-white-en 533311000 - 5415207048338 - Seal & Bond MS22 X white - cartridge 310ml 533311000 5415207048338 Seal & Bond MS22 X white - cartridge 310ml
sb-ms22-x-310ml-white-en 533312000 - 5415207048352 - Seal & Bond MS22 X anthracite - cartridge 310ml 533312000 5415207048352 Seal & Bond MS22 X anthracite - cartridge 310ml
sb-ms22-x-310ml-white-en 533313000 - 5415207057170 - Seal & Bond MS22 X light grey - cartridge 310ml 533313000 5415207057170 Seal & Bond MS22 X light grey - cartridge 310ml
sb-ms22-x-310ml-white-en 533380390 - 5415207077024 - Seal & Bond MS22 X black - sausage 600ml 533380390 5415207077024 Seal & Bond MS22 X black - sausage 600ml

Description

MS22 X was developed for use in all conditions: from -10°C to +40°C and where excellent adhesion and high flexibility are required. MS22 X resists weathering, UV rays and chemical corrosion very well. This makes it ideal for use in all environments, from construction to industry.

Application

  • Horizontal as well as vertical expansion joints inside and out
  • Glass seal in all climatic conditions
  • Sanitary kit with category XS1 mildew resistance
  • Connection joints between materials with very different expansion behaviour
  • Flexible bonding (movement capacity 20%).

Technical information

sb-ms22-x-310ml-white-en-1024

Seal & Bond MS22 X

HIGH-TECH SEALANT

sb-ms22-x-310ml-white-en-1024
  • Basis: hybrid MS polymer.
  • Curing: polymerisation by air humidity.
  • Odour: neutral.
  • Shore-A hardness (DIN 53505): 22.
  • E-module 100% elongation (DIN 53504 S2): +/- 0.66 N/mm².
  • Tensile strength (DIN 53504 S2): +/- 1.4 N/mm².
  • Elongation at break (DIN 53504 S2): +/- 600%.
  • Movement capacity: 20%.
  • Application temperature: -10°C to +40°C.
  • Skin formation at 23°C/50% relative humidity: 5-6 minutes.
  • Shrinkage (DIN EN ISO 10563): ≤ 3 %.
  • Paintable: yes (varnishes and alkyd resin-based products take slightly longer to cure).
  • Relative density: 1.5. 
  • Temperature resistance after curing: -40°C to +90°C.
  • Frost resistance: down to -20°C during transport.
  • Shelf life: 18 months, store in a cool, dry place in the original packaging.
  • ec1-plus-zonderr
  • fork-glass-icon-ec1935
  • eurofins-gold
  • isega-black
  • aplus-quadri-nlfr

Technical documents

Instructions

  • Bring the cartridge up to room temperature before use.
  • Apply to a clean substrate, free of snow and ice, and clean with Safety Clean and/or Multifoam if necessary. FS version, if required.

 

Test adhesion on plastics, powder coatings, exotic woods and bituminous materials. Seal & Bond Special Primer can improve adhesion on difficult synthetic materials.

Soft and/or porous substrates should first be strengthened using Fixapox.

Alkyd resinous varnishes will cure more slowly.

Use Safety Clean for a perfect finish and for removing any uncured Novatio polymers.

Use Novakleen for finishing on porous materials.

Order this item

Pro Shop

A question?

Contact us