NPG-1370 Nova Power Grip 2K ME

LOW-ISOCYANATE, IMPACT-RESISTANT CONSTRUCTION ADHESIVE

Gluing, filling and repairing 

Hand-tight after 30 minutes 

Can be processed: sanded, drilled, milled, tapped, etc. 

ME: Micro emission, very low content of free isocyanates 
 

nova-power-grip-2k-me-npg-1370-250ml-be-590416000-1024

Packaging

SKU EAN Description
nova-power-grip-2k-me-npg-1370-250ml-be-590416000 590416000 - 5415207084398 - NPG-1370 Nova Power Grip 2K ME - cartridge 250ml 590416000 5415207084398 NPG-1370 Nova Power Grip 2K ME - cartridge 250ml

Description

  • Odourless, shrink-free 2-component polyurethane adhesive with extremely low Isocyanate content.
  • Safe to use, no certification or training required.
  • Hand-tight after 30 minutes, workable and fully loadable after 1–2 hours.
  • Very high adhesive strength and strong shock resistance.
  • An opened tube can be used several times. 
  • The micro-emission formulation means that users do not need to follow any specific training and can work with the product without any health risks. 
     

Application

  • Structural bonding of all common building materials: glass, stone, natural stone, ferrous and non-ferrous metals, stainless steel, ... 
  • Repairing and filling cracks and holes in plastics (Carbon, ABS, PVC, PC, HPL, PA, PET, ...) and wood (spruce, pine, oak, meranti, ...). 
  • Body repair of plastic and metal parts in cars, motorcycles, boats, caravans, campers, etc. 
  • Filling drill holes that need to be re-drilled. 
  • Restoring wood in case of broken furniture hinges. 

Technical information

nova-power-grip-2k-me-npg-1370-250ml-be-590416000-1024

NPG-1370 Nova Power Grip 2K ME

LOW-ISOCYANATE, IMPACT-RESISTANT CONSTRUCTION ADHESIVE

nova-power-grip-2k-me-npg-1370-250ml-be-590416000-1024
  • Base: polyurethane. 
  • Colour: beige 
  • Mixing time: 3 min. 
  • Working time: 6 min. 
  • Ready to handle after: 30 min. 
  • Fully loadable after: 90 min. 
  • Hardness: shore D 70. 
  • Tensile strength: 2600 N/cm². 
  • Shear strength on aluminium (sanded): 650 N/cm². 
  • Shear strength on stainless steel (sanded): 910 N/cm². 
  • Shear strength on PVC (sanded): 270 N/cm². 
  • Shear strength on polycarbonate (sanded): 880 N/cm². 
  • Elongation at break: 58%. 
  • Chemical resistance:  
    • Good: water, seawater, alcohols, dilute acids and bases, aliphatic solvents, fuels, oils 
    • Bad: concentrated acids and bases, acetone 
  • Shelf life: 24 months in original, closed packaging; store cool, dry and frost-free. Can be used for up to 6 months after opening.  
  • Safety precautions: Please consult the safety data sheet. 
     

 

Instructions

Surface preparation 

  • Make the surface dust-free.
  • Sand smooth materials (grit 120). 
  • Degrease with Safety Clean and/or Multifoam and allow to dry. 
     

Pattern preparation 

  • Remove the cap from the cartridge and place the cartridge in the gun. Pump until both components come out of the cartridge evenly. 
  • Place the mixer tip on the cartridge. Spray the first 2 cm of product onto a piece of cardboard, do not use. 
     


Usage 

  • Apply evenly to or in the materials to be bonded or filled. The ideal adhesive thickness for optimum strength is 0.5–1 mm 
  • Filling can be done in a single layer up to +/- 10 mm. After the first curing (30 minutes) a new layer can be applied. 
  • After an interruption of +/- 3 minutes: insert a new mixer tip.  
  • Clean spilled adhesive with Safety Clean and/or novawipes  
  • Always perform an adhesion test when using on difficult-to-bond materials. 

 
Storage 

  • Leave the mixer tip installed until next use. Nova Power Grip can be reused in this way for 4–6 months. 
  • When reusing: remove the old mixer tip, clean the nozzle openings and insert a new mixer tip. 

 
Tips: 

  • Higher temperatures mean faster curing. Heat the pieces and/or the Nova Power Grip tube to a maximum of 50°C. 
  • Use Q-fix 120 for powerful anchoring in drill holes.
     

Technical documents

Order this item

A question?