Foam Cleaner

Removing uncured PU foam

• Install the supplied red nozzle.
• Apply to a cloth and clean the surface.
• Repeat if necessary.

Cleaning the Foam Gun

• Fully close the Foam gun control knob and mount the Cleaner on the gun. Screw the spray can onto the gun until it blocks.
• Fully open the gun adjustment screw and press the gun handle to remove any foam residue.
• If pure cleaner comes out of the gun, release the lever and allow to act for a few minutes.
• Press the lever until pure cleaner comes out.
• Turn the knob fully closed and remove the cleaner.                                         
• Remove any remaining foam that is still around the ring by using the red spray head.

Test the resistance of plastics and delicate surfaces on a non visible location.