FCP-110 FP Construct Ramen en Deuren

1K HYBRID MS POLYMER ADHESIVE

Corner bonding of window and door profiles.

Hand-tight after 3 hours.

fp-construct-fcp-110-290ml-be-wd-527306116-1024

Packaging

  • 527306116 - FCP-110 FP Construct Ramen en Deuren light grey - cartridge 290ml

Description

Contains no isocyanates, is free of known toxic substances and is non-corrosive. Safe on all wet paints, powder and structural coatings. Fast and high power build-up, good adhesion to aluminium alloys. The rigid connections reduce vibration and contact noise.

Application

Bonding of crimp corners in window and door profiles.

Technical information

fp-construct-fcp-110-290ml-be-wd-527306116-1024

FCP-110 FP Construct Ramen en Deuren

1K HYBRID MS POLYMER ADHESIVE

fp-construct-fcp-110-290ml-be-wd-527306116-1024
  • Basis: 1K MS hybrid polymer.
  • Hardening: hardening by reaction with air humidity.
  • Consistency: paste.
  • Colour: light grey.
  • Processing temperature: between +5°C and +35°C.
  • Temperature resistance: from -40°C to +90°C.
  • Skin formation: 2-5 minutes.
  • Curing (in miter): 24h (maximum strength after 7 days).
  • Tensile strength without MGM-170: After 3h: 0.3 N/mm².
  • After 24h: 1.4 N/mm².
  • After 7 days: 2.0 N/mm².
  • Tensile strength with MGM-170:
    • after 3h: 0.7 N/mm².
    • after 24h: 1.8 N/mm².
    • after 7 days: 2.0 N/mm².
  • Elongation at break: >200%.
  • Shelf life: 12 months, kept cool and dry in original packaging.
  • Safety measures: please consult the safety data sheet.

Instructions

  • Clean if necessary with Safety Clean and/or Multifoam.

 

Optionally: apply MGM-170 as a booster for faster force build-up and guaranteed curing. Lightly mist the chambers of the crimp corners or moisten the crimp corners with MGM-170.

  • Apply FCP-110 FP Construct in the chambers.
  • Place the crimp corners and assemble the window.
  • Remove excess product, press the corners and clean the mitres immediately with Safety Clean.

Technical documents

Order this item

A question?